The Productivity1000 remote I/O module, P1-RX, provides a low-cost remote I/O solution for both the P1-550 and P2-550 controllers. Up to 4 P1-RX remote modules can be used with the P1-550, and up to 8 can be used with the P2-550. That adds an additional 512 I/O points to the P1000 system, which did not offer remote expansion before, and an additional 1024 for the P2000 at a much lower cost than the existing P2-RS expansion module. All P1-RX modules and connected I/O are auto-discovered in the Productivity Suite programming software with pre-assigned tags for each I/O point that can Continue reading New Product Announcement: P1-RX Remote I/O Module for the Productivity 1000 Series
We’re pleased to announce that the excellent Productivity1000 range has been expanded with the addition of a new CPU (P1-550) two new power supply modules (P1-01DC & P1-02AC), five new analogue modules, (P1-04AD, P1-08ADL-1, P1-08ADL-2, P1-08DAL-1 & P1-08DAL-2), and two new speciality modules – High Speed Counter & Pulse-Width Modulation (P1-02HSC & P1-04PWM). Productivity1000 I/O modules are auto-discovered and easily added or removed. QR (Quick Response) codes are printed on each module linking to latest specs and wiring. New CPUThe new P1-550 CPU boasts up to 50 MB ladder memory, microSD card slot, 2 Ethernet 10/100Base-T ports (vs 1 on Continue reading New Product Announcement: New CPU, PSUs and Analogue i/o for the Productivity1000
To compliment the excellent Productivity Series Controller from Automation Direct, Weintek have added a dedicated driver and tag import facility so user Tags from the controller project can be easily added to an HMI program. First write your Productivity Controller program in Productivity Suite… If you’re familiar with Productivity Suite, you no doubt know that you can define tags for your i/o, registers, timer values etc as you go making it a very intuitive controller to use. The Productivity tag database is accessed from the edit menu. In this example, we’re only looking at Discrete i/o, Integers & Booleans… You Continue reading New Weintek Driver Announcement – Automation Direct Productivity Series
10 new modules have been added to the popular Productivity 1000 Series. These are as follows: P1-08NE3 – 8pt 24V VAC/VDC input module, 2 isolated commons P1-08NA – 8pt 120-240VAC input module, 2 isolated commons P1-08TA – 8pt 120-240VAC output module. 0.5A/pt, 2 isolated commons P1-16ND3 – 16pt 24VDC sink/source input module, 2 isolated commons P1-16NE3 – 16pt 24VCD/VAC input module, 2 isolated commons P1-15TD1 – 15pt 24VDC sinking output, 1A/pt P1-15TD2 – 15pt 24VDC sourcing output, 1A/pt P1-04RTD – 4ch RTD input, 16bit resolution P1-4ADL2DAL-1 – 4ch 0-20mA input/2ch 0-20mA output P1-4ADL2DAL-2 – 4ch 0-10v input/2ch 0-10v output
The new Productivity1000 stackable micro PLC is the super compact yet highly capable member of AutomationDirect’s Productivity controller family. The P1000 is packed withmany of the features of the Productivity series but housed in a smaller, slimmer design to provide space, budget and time savings. The P1-540 CPU has a 50Mb memory and features four onboard communications ports including micro USB, serial RS-485, serial RS-232 and Ethernet 10/100Mbps connections. Supported communications protocols include EtherNet/IP®, Modbus RTU/TCP and ASCII. The micro USB 2.0 (type B) port provides a plug-and-play connection for programming, online monitoring and firmware upgrades. The 10/100 Mbps Ethernet Continue reading Announcing the Productivity 1000!