Tag Archives: New product

New Product Announcement: P1-RX Remote I/O Module for the Productivity 1000 Series

Posted on by
P1-RX Productivity 1000 Remote i/o module for use with Productivity P1-550 and P2-550 CPUs

The Productivity1000 remote I/O module, P1-RX, provides a low-cost remote I/O solution for both the P1-550 and P2-550 controllers. Up to 4 P1-RX remote modules can be used with the P1-550, and up to 8 can be used with the P2-550. That adds an additional 512 I/O points to the P1000 system, which did not offer remote expansion before, and an additional 1024 for the P2000 at a much lower cost than the existing P2-RS expansion module. All P1-RX modules and connected I/O are auto-discovered in the Productivity Suite programming software with pre-assigned tags for each I/O point that can Continue reading New Product Announcement: P1-RX Remote I/O Module for the Productivity 1000 Series→

New Product Announcement: Weintek cMT3072X & cMT3072XH

Posted on by

Lightweight and affordable, 7” HMI have been widely adopted in many different industries and are a firm favourite. With this in mind, Weintek have released new 7” HMI models in the cMT X Series range: cMT3072X and cMT3072XH (“cMT3072X(H)”) to help users with IIoT integration in their smart factories whilst also providing exceptional user experience. cMT3072X(H) is equipped with a quad-core 64-bit Cortex A35 CPU, a big performance step up from the dual-core 32bit processor of the existing cMT3071/cMT3072 models, with the new cMT X Series models boasting a 20% improvement in computing and display performance, delivering better, faster user Continue reading New Product Announcement: Weintek cMT3072X & cMT3072XH→

New Product Announcement: Expanded Communications and Analog I/O Capabilities for the BRX PLC

Posted on by

New expansion I/O modules from AutomationDirect for the BRX stackable micro brick PLC include communications modules, universal analogue I/O modules, and universal temperature combination I/O modules. Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller, creating a sturdy and rugged PLC platform. Added BRX serial communications modules provide four isolated RS-232 ports that support communications flow control or RS-422 serial ports. Also available are BRX single-channel RS-232 (with flow control) and RS-422 Pluggable Option Modules. Supported protocols include Do-more! Protocol, Modbus RTU (Master/Slave), K-Sequence, and ASCII (In/Out). Data rates are 1200 Continue reading New Product Announcement: Expanded Communications and Analog I/O Capabilities for the BRX PLC→

New Product Announcement: Weintek cMT X Series

Posted on by

Product Introduction HMIs now often have a wide variety of capabilities, such as data display, machine control, data storage, PLC communication, protocol translation, graphic display, alarm notification, media playback, and IIoT integration. For an advanced HMI, these capabilities are now perceived as basic requirements, however, they can place a heavy burden on the HMIs CPU. Operators are used to operating high-speed consumer devices such as smartphones and tablets and expect a similar user experience and operation speed when working with HMI. For these reasons, Weintek has released the cMT X Series HMI: cMT3092X / cMT3152X / cMT3162X. The cMT X Continue reading New Product Announcement: Weintek cMT X Series→

New Product Announcement: New CPU, PSUs and Analogue i/o for the Productivity1000

Posted on by

We’re pleased to announce that the excellent Productivity1000 range has been expanded with the addition of a new CPU (P1-550) two new power supply modules (P1-01DC & P1-02AC), five new analogue modules, (P1-04AD, P1-08ADL-1, P1-08ADL-2, P1-08DAL-1 & P1-08DAL-2), and two new speciality modules – High Speed Counter & Pulse-Width Modulation (P1-02HSC & P1-04PWM). Productivity1000 I/O modules are auto-discovered and easily added or removed. QR (Quick Response) codes are printed on each module linking to latest specs and wiring. New CPUThe new P1-550 CPU boasts up to 50 MB ladder memory, microSD card slot, 2 Ethernet 10/100Base-T ports (vs 1 on Continue reading New Product Announcement: New CPU, PSUs and Analogue i/o for the Productivity1000→

New Product Announcement: MT8053iE 4.3″ HMI with Dual Ethernet & Built-in EasyAccess 2.0

Posted on by

Product Introduction: Ethernet is gradually becoming the standard interface for PLCs and controllers, the demand for data exchange with upper layer devices (SCADA) over the network and integration with cloud services is also increasing. To meet these demands, Weintek released models with dual Ethernet ports: MT8073iE(7”), MT8090XE(10”), and cMT Series, which all received positive customer feedback. To provide users with a wider choice of screen sizes, Weintek have launched a new 4.3″ dual-Ethernet HMI – MT8053iE. Adding new I/O ports into such small enclosure is always a challenge due to space constraints, however, Weintek pushed the boundaries to make it possible. Continue reading New Product Announcement: MT8053iE 4.3″ HMI with Dual Ethernet & Built-in EasyAccess 2.0→