TechTip: Weintek EasyAccess 2.0

This TechTip is about setting up EasyAccess 2.0. We’ll step through the stages to regisiter a Domain Account, how to add EasyAccess 2.0 to your HMI and how to use PassThrough to access your PLC or controller. Create a Domain account EasyAccess 2.0 requires a Domain account, the default administrator user is “admin”. Other users can be added to the Domain later, and can be managed through the EasyAccess web portal. To create a Domain account, click here: https://account.ihmi.net/domain/index.php and click on “Create Domain Account”. Enter the details you want to use for your Domain After clicking “Register”, you’re taken Continue reading TechTip: Weintek EasyAccess 2.0

New Product Announcement: MT8053iE 4.3″ HMI with Dual Ethernet & Built-in EasyAccess 2.0

Product Introduction: Ethernet is gradually becoming the standard interface for PLCs and controllers, the demand for data exchange with upper layer devices (SCADA) over the network and integration with cloud services is also increasing. To meet these demands, Weintek released models with dual Ethernet ports: MT8073iE(7”), MT8090XE(10”), and cMT Series, which all received positive customer feedback. To provide users with a wider choice of screen sizes, Weintek have launched a new 4.3″ dual-Ethernet HMI – MT8053iE. Adding new I/O ports into such small enclosure is always a challenge due to space constraints, however, Weintek pushed the boundaries to make it possible. Continue reading New Product Announcement: MT8053iE 4.3″ HMI with Dual Ethernet & Built-in EasyAccess 2.0

TechTip: Enabling EasyAccess 2.0 on a cMT-GXX Gateway

The reduced interface in EasyBuilder Pro for the cMT-GXX series Gateway means that to start the EasyAccess 2.0 service we have to find a way to set the EasyAccess Control word LW 10820 to “1” to start the service. (At this point it is assumed that you have already purchased EasyAccess 2.0 and assigned it to your cMT-GXX gateway using PC Activator or the online service in on the web portal.) The Macro below will set the required control word to enable the service: =========================================== macro_command main() short EA2Enable = 1 // EA2Enable is a short (16bit word) and we’re Continue reading TechTip: Enabling EasyAccess 2.0 on a cMT-GXX Gateway