New expansion I/O modules from AutomationDirect for the BRX stackable micro brick PLC include communications modules, universal analogue I/O modules, and universal temperature combination I/O modules. Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller, creating a sturdy and rugged PLC platform. Added BRX serial communications modules provide four isolated RS-232 ports that support communications flow control or RS-422 serial ports. Also available are BRX single-channel RS-232 (with flow control) and RS-422 Pluggable Option Modules. Supported protocols include Do-more! Protocol, Modbus RTU (Master/Slave), K-Sequence, and ASCII (In/Out). Data rates are 1200 Continue reading New Product Announcement: Expanded Communications and Analog I/O Capabilities for the BRX PLC
PID loop control capability (up to 8 loops simultaneously) has been added to the CLICK® Series of stackable, Ethernet micro brick PLCs. This feature is available in version 2.50 or greater of the CLICK software, which can be downloaded from our website here. CLICK PID control is streamlined with only the features that most users need, including direct or reverse acting control, pulse width modulated control outputs, bumpless transfer, anti-windup, auto-tuning, process variable alarms, process variable limits, control output limits and error deadband. The PID configuration interface is user-friendly and steps you through the parameters required. The CLICK PID monitor Continue reading New Feature Announcement: CLICK now has PID
We’re pleased to announce that the excellent Productivity1000 range has been expanded with the addition of a new CPU (P1-550) two new power supply modules (P1-01DC & P1-02AC), five new analogue modules, (P1-04AD, P1-08ADL-1, P1-08ADL-2, P1-08DAL-1 & P1-08DAL-2), and two new speciality modules – High Speed Counter & Pulse-Width Modulation (P1-02HSC & P1-04PWM). Productivity1000 I/O modules are auto-discovered and easily added or removed. QR (Quick Response) codes are printed on each module linking to latest specs and wiring. New CPUThe new P1-550 CPU boasts up to 50 MB ladder memory, microSD card slot, 2 Ethernet 10/100Base-T ports (vs 1 on Continue reading New Product Announcement: New CPU, PSUs and Analogue i/o for the Productivity1000
10 new modules have been added to the popular Productivity 1000 Series. These are as follows: P1-08NE3 – 8pt 24V VAC/VDC input module, 2 isolated commons P1-08NA – 8pt 120-240VAC input module, 2 isolated commons P1-08TA – 8pt 120-240VAC output module. 0.5A/pt, 2 isolated commons P1-16ND3 – 16pt 24VDC sink/source input module, 2 isolated commons P1-16NE3 – 16pt 24VCD/VAC input module, 2 isolated commons P1-15TD1 – 15pt 24VDC sinking output, 1A/pt P1-15TD2 – 15pt 24VDC sourcing output, 1A/pt P1-04RTD – 4ch RTD input, 16bit resolution P1-4ADL2DAL-1 – 4ch 0-20mA input/2ch 0-20mA output P1-4ADL2DAL-2 – 4ch 0-10v input/2ch 0-10v output
The AutomationDirect Productivity2000 PLC system now has 50 discrete and analog I/O modules providing over 400 local I/O points. Using remote expansion, over 4,000 total I/O points are possible! New DC discrete I/O modules include 8-, 16- and 32-point, 12-24 VDC, sink/source modules with additional isolated commons. Two for the 8- and 16-point modules and four isolated commons for the 32-point module. The Productivity2000 is a modular, rack-based system with a full lineup of discrete, analog and specialty I/O modules. The high-performance CPU has 50Mb memory, fast scan times and five communication ports. Two 10/100 Mbps Ethernet ports allow programming, Continue reading More Productivity2000 PLC Discrete I/O Modules Added
New! – CLICK Ethernet PLC Units with Built-in Analog I/O The popular CLICK Series stackable micro brick PLCs are now available with both Ethernet communications capabilities and analog I/O built-in. 12 new units have been added to the range providing both discrete and analog I/O including four discrete inputs, four discrete outputs, two or four analog inputs and two analog outputs. The CLICK Ethernet/Analog PLC units are available with a variety of current and voltage (0-20mA, 4-20mA, 0-5VDC, 0-10VDC) inputs and outputs, and with 24 VDC or 120 VAC discrete inputs and DC or relay outputs. The new CLICK Analog Continue reading New! – CLICK Ethernet PLC Units with Built-in Analog I/O
The new Productivity1000 stackable micro PLC is the super compact yet highly capable member of AutomationDirect’s Productivity controller family. The P1000 is packed withmany of the features of the Productivity series but housed in a smaller, slimmer design to provide space, budget and time savings. The P1-540 CPU has a 50Mb memory and features four onboard communications ports including micro USB, serial RS-485, serial RS-232 and Ethernet 10/100Mbps connections. Supported communications protocols include EtherNet/IP®, Modbus RTU/TCP and ASCII. The micro USB 2.0 (type B) port provides a plug-and-play connection for programming, online monitoring and firmware upgrades. The 10/100 Mbps Ethernet Continue reading Announcing the Productivity 1000!
AutomationDirect’s Productivity2000 programmable controller line now includes additional low-cost discrete and analogue input and output modules. The new AC and DC discrete I/O modules include 8-point, 100-120 VAC input and output modules, 8 and 15-point, 3.3-24 VDC input and output modules and high-density, 32-point,12-24 VDC input modules. These I/O modules allow easy connections for photo eyes, proximity sensors, limit switches, pushbuttons, light curtains, or any other discrete control device. The new 12-bit, low-resolution, 4-channel, current and voltage analogue I/O modules are available to precisely measure and control process variables such as level, flow, and pressure. And for easy I/O module Continue reading More Discrete and Analogue i/o Modules to Productivity2000® Line