TechTip: How to program Weintek HMI via Ethernet

This guide will show you how to connect a Weintek HMI to a PC via ethernet; to do this, we’ll be making sure that both screen and PC/laptop network adaptor are on the same subnet as each other.  Note: The illustrations in this Guide are based on an iE Series HMI. Other Series HMIs may appear a little different. For HMIs with dual ethernet, the IP addresses of the ports MUST be on different subnets.  Weintek System Settings1. On the Weintek HMI, tap the black arrow bottom right  2. To check if there is an IP address already set on the HMI, tap the Information button to show the settings for the device. In this case, we Continue reading TechTip: How to program Weintek HMI via Ethernet