New! – CLICK Ethernet PLC Units with Built-in Analog I/O The popular CLICK Series stackable micro brick PLCs are now available with both Ethernet communications capabilities and analog I/O built-in. 12 new units have been added to the range providing both discrete and analog I/O including four discrete inputs, four discrete outputs, two or four analog inputs and two analog outputs. The CLICK Ethernet/Analog PLC units are available with a variety of current and voltage (0-20mA, 4-20mA, 0-5VDC, 0-10VDC) inputs and outputs, and with 24 VDC or 120 VAC discrete inputs and DC or relay outputs. The new CLICK Analog Continue reading New! – CLICK Ethernet PLC Units with Built-in Analog I/O
Announcing the DURApulse AC Drives – GS4 Series (230 / 460 VAC Sensorless Vector w/PLC) New! … Next Generation GS4 Series DURApulse AC Sensorless Vector Drives. 1 to 25 HP … 230 VAC Single/Three-Phase 1 to 100 HP … 230 VAC Three-Phase 1 to 300 HP … 460 VAC Three-Phase The DURApulse GS4 series of AC drives includes many of the same standard features as our other GS drives including dynamic braking, PID, removable keypad, and much more: Single-phase input capability (all 230VAC drives can be supplied single-phase) V/Hz control or sensorless vector control for improved speed regulation 100kA Continue reading New from Automation Direct – GS4 Drives
The latest addition to the Weintek HMI range is the 7″ cMT3072. Built on the proven Weintek cMT architecture, the cMT3072 brings the rich features of the CloudHMI cMT architecture to the 7″ HMI market. The panel cut-out is the same as the existing Weintek 7″ HMI but the resolution is improved from 800 x 480 to 1024 x 600 on the cMT3072. The screen itself is IPS rather than the existing TFT offering superior clarity and wider viewing angles. With the built-in EasyAccess 2.0 licence, remote access to the HMI and PassThrough to PLCs and controllers is a breeze and dual ethernet Continue reading 7″ cMT Series HMI – cMT3072 – Launching 1st December 2017
The new Productivity1000 stackable micro PLC is the super compact yet highly capable member of AutomationDirect’s Productivity controller family. The P1000 is packed withmany of the features of the Productivity series but housed in a smaller, slimmer design to provide space, budget and time savings. The P1-540 CPU has a 50Mb memory and features four onboard communications ports including micro USB, serial RS-485, serial RS-232 and Ethernet 10/100Mbps connections. Supported communications protocols include EtherNet/IP®, Modbus RTU/TCP and ASCII. The micro USB 2.0 (type B) port provides a plug-and-play connection for programming, online monitoring and firmware upgrades. The 10/100 Mbps Ethernet Continue reading Announcing the Productivity 1000!